Innovision 1 - Barrel on ball bearings.
- A 96 balls, non lubricated ball cearing guides the barrel both vertically and laterally.This solution is on the market since 2005.

Innovision 2 - Dual Ulysse escapement
- The Dual Ulysse escapement does not need any lubrication.Its reduced angle of lift (31 degree) provides a great advantage. It is on the market since 2005.

Innovision 3 - Lubrication free bearing in silicium are fitted into the brass base plate . No oil recesses are necessary.

Innovision 4 - DRIE precision and low friction advantages put together.
- The escapement bridge in solid silicium benefits from the high precision of the process. The good friction coefficient of silicium is another advantage.The movement designer is free to design holes very close to the exterior of the bridge as no jewels are required.

Innovision 5 - The reinforced silicium bridge.
- Due to the combination of two technologies DRIE and LIGA, Sigatec, Mimotec and Ulysse Nardin have produces a bi-material bridge which performs extremely well.
The exclusive process stands for precision,silicium stands for low friction and nickel stands for mechanical toughness.

Innovision 6 - Exploiting the elasticity of silicium.
- Ulysse Nardin developed the revolutionary shock absorber bearing in the balance wheel shaft which pivots in the centre of the silicium disc.The elastic spiral shaped silicium disc deforms itself when shocks arise and returns to its original position immediately after the shock has been absorbed.

Innovision 7 - Silicium spring.
- The silicium hairspring is an excellent solution and we have the know - how to produce it.

Innovision 8 - Roller and Pin.
The Roller and pin are made in one precise single component in the double sided DRIE process developed by Sigatec.

Innovision 9 - Stopper fork and security pin of the Dual Ulysse escapement.
- The Dual Ulysse escapement blocker is a multifunctional element.Similarly to the anchor of the Swiss Anchor escapement, it bares a safety-pin which must be perfectly aligned.Thanks to the double side etching process created by Sigatec, this former multi part units can be made as a single component not requiring any assembly or touch up.

Innovision 10 - Two levels process.
- The escapement wheel and pinion are made in a single piece thanks to the two levels etching process created by Sigatec .This new technology will reduce many movement designers all over the world.